Class NetworkAclOutboundRuleConfig

NetworkConfig / VpcConfig | VpcTemplatesConfig / NetworkAclConfig / NetworkAclOutboundRuleConfig

Network ACL outbound rule configuration. Use this configuration to define outbound rules for your network ACLs. An outbound rule allows or denies specific outbound traffic at the subnet level.

The following example allows outbound TCP traffic in the ephemeral port ranges to destination CIDR 10.0.0.0/16:

Example

- rule: 200
  protocol: 6
  fromPort: 1024
  toPort: 65535
  action: allow
  destination: 10.0.0.0/16

Hierarchy

  • NetworkAclOutboundRuleConfig

Implements

Constructors

constructor

Properties

action destination fromPort protocol rule toPort

Constructors

constructor

Properties

Readonly action

action: "allow" | "deny" = 'allow'

The action for the network ACL rule.

Readonly destination

destination: string | NetworkAclSubnetSelection = ''

The destination of the network ACL rule.

Remarks

Possible values are a CIDR range or a network ACL subnet selection configuration.

See

NetworkAclSubnetSelection

Readonly fromPort

fromPort: number = -1

The port to start from in the network ACL rule.

Readonly protocol

protocol: number = -1

The IANA protocol number for the network ACL rule. You may also specify -1 for all protocols.

Readonly rule

rule: number = 100

The rule ID number for the rule.

Remarks

CAUTION: Changing this property value causes the rule to be recreated. This may temporarily impact your network traffic while the rule is updated.

Rules are evaluated in order from low to high and must be unique per direction. As soon as a rule matches traffic, it's applied regardless of any higher-numbered rule that might contradict it.

Readonly toPort

toPort: number = -1

The port to end with in the network ACL rule.

Settings

Member Visibility

Theme

Generated using TypeDoc